Sanding and coating a wooden floor
Parquet and wooden floors in general have a natural shine that is then synthetically promoted, so when they are new, they look very healthy and perfect. However, dust, dirt and constant cleaning added to daily traffic, cause the erosion of the first layers of that glossy finish, so that the wood loses life and its appearance becomes sad and dull. We can restore its shine without the need to call a professional, saving time and money.
At Walk On Wood, take pride in our work and only use second to none products to ensure our work as timber floor installers in Perth, sanding and coating are of the best quality.
Recover the shine in the wood
To start the work, the first thing is to clear the floor, remove furniture and leave the entire surface free. Then you have to prepare the floor by removing all the dust and dirt. Use a vacuum cleaner for this as it is convenient to lift the dust off the floor, not move it. In addition, when doing it with a brush or broom, the dust is likely to act like sandpaper, giving the floor even more shine or scratching it.
We clean the floor, we have several options. The one that offers the best results is also the most laborious and the one that involves the most economic investment. It involves gently sanding and polishing the surface with a fine-grained and not very abrasive sandpaper and then applying a layer of some varnish, wax, lacquer or polyurethane-based solvent that contains resins and catalysts, to seal and give a finish again shiny to the ground. These are special products that restore the shine to wood, but that is why they are more expensive than other options.
Pre-sanding is important so that the wood absorbs and takes better after the product that will give shine. Even so, if the floor lost its shine but not everything, you can apply the varnish with a brush without sanding, it will not be the same but the improvement will also be appreciable.
There are also home remedies to restore shine to the floor. Vinegar mixed with water is one of the most common options for wooden floors. This works when the floor has not lost all the varnish, as the vinegar does is improve the appearance of the varnish, not the wood.
Laundry detergent in water also works. Let’s say it’s the closest thing to wax. Add two plugs to three liters of water and scrub the floor with a sponge or with a mop or mop. Repeat the process as many times as necessary until you achieve the desired shine.
Some people dare with a few drops of oil mixed with the same amount of vinegar. This creates a kind of homemade wax that must be applied directly to the floor area by area with a wide brush to speed up the work. Then pass a cloth to rub and dry at the same time. This remedy is very effective but you have to be very careful not to overdo it with the oil as excess grease will create very slippery surfaces, which will stain and where fingerprints will be easily marked.
5 natural products to restore the shine of your wooden floor
The application of some natural products, such as vinegar and olive oil, can help restore the shine of wooden floors when they look dull and worn.
To restore the shine of your wooden floor you do not always have to use waxes. While it is true that these products are effective, there are also alternative solutions that provide similar results.
Best of all, its properties help keep the material in optimal condition, as it removes dirt and prevents stains and cracks from forming. In addition, they are friendly formulas with the environment, since they are made with ecological elements.
5 products to restore the shine of your wooden floor
Are you interested in recovering the shine of your wooden floor in a natural way? In that case, below we want to share 5 natural products that facilitate this task.
- Beeswax and olive oil
Combining a little beeswax with olive oil we can obtain a homemade wax to care for wooden floors and furniture. In fact, we can add a little scented oil to leave a pleasant feeling of freshness after cleaning.
Ingredients
- ½ cup of beeswax (100 g).
- 1 cup of olive oil (200 g).
- Optional: 1 teaspoon of lavender essential oil (5 g).
Preparation
First, add the beeswax to a heat-resistant container and melt it in the microwave or in a double boiler. Second, when it is melted, add the olive oil and stir it so that it integrates well. Then leave it on a minimum heat for 2 minutes and remove it. Then add the lavender oil and let it sit at room temperature. Finally, store it in a glass jar.
How to use
First, soften some wax in the microwave and rub it on the hardwood floor you want to shine. After that, buff it with a soft cloth or mop to the desired look.
- Coconut oil and lemon
Thanks to its oily and moisturising texture, coconut oil can serve as an alternative solution to restore the shine of your wooden floor. In addition, if we combine it with lemon juice, we obtain a disinfectant product that also removes mites and bacteria.
Ingredients
- ½ cup of coconut oil (100 g).
- The juice of one lemon.
Preparation
First, melt the coconut oil in a double boiler and combine it with the juice of a fresh lemon. Next, store it in an airtight container and proceed to apply it.
How to use
Spread the preparation on the wooden floor and polish it with a dry mop. Finally, let it absorb without rinsing.
- White vinegar and olive oil
White vinegar can help remove odors from your garbage can.
Mixing white vinegar with olive oil results in a complete cleaner for furniture and hardwood floors. Also, its antimicrobial properties help disinfect the surface while its oily compounds give it shine.
Ingredients
- ½ cup of white vinegar (125 ml).
- ½ cup of olive oil (125 ml).
Preparation
First, add the white vinegar to a deep bowl. Next, add the olive oil and mix it in.
How to use
First, spray the solution onto the hardwood floor and rub it in with a soft cloth or mop. Then clean to the desired shine.
- White vinegar and jojoba oil
If using olive oil is not an option, you can also enhance the cleaning effects of white vinegar with the properties of jojoba oil. Although it is a formula that acts in a similar way to the previous one, it is ideal for deodorizing and disinfecting.
Ingredients
- ½ cup of white vinegar (125 ml).
- ¼ cup of jojoba oil (62 ml).
Preparation
Just pour the white vinegar into a bowl and combine it with the jojoba oil.
How to use
Rub the product on your wooden floor and let it act without rinsing. Polish for several minutes to make the material shine.
- Almond oil
Almond oil contains moisturising fats that allow you to restore the shine of your wooden floor without much difficulty. In fact, its direct application softens the surface and eliminates the stains that are formed by the accumulation of dirt.
Ingredients
- ¼ cup of almond oil (62 ml).
- ½ cup of water (125 ml).
Preparation
Add the oil to a bowl and mix it with warm water. Avoid using hot water because property can be ruined.
Take into account the expertise of our professional timber floor installers in Perth and contact Walk on Wood if you want to receive the services of the best qualified timber floor installers and care experts in Australia.
