The Blog



Bear in mind that here at Great Western Trailers you will find everything you need to carry merchandise to a specific destination.

The transmissions of the trailers, although they seem very resistant elements, also require constant maintenance. That is why we leave you the following 8 recommendations so that your transmission continues to push your trailer over hundreds of thousands of kilometers more.

  1. Constantly check transmission fluid

Trailer transmissions, like their engine, require lubrication that is achieved by a transmission fluid. It is one of the most important elements so that your level of operation is maintained at the maximum. Most transmissions have a bayonet with which it is very easy to check the lubricant level. In case you don’t have the bayonet, we recommend checking the user manual or going to an authorised service center.

  1. Timely maintenance

Most transmission problems start out very small and only get worse over time. Major repairs can be avoided when we detect problems early. It does not matter if it is a witness on the dash, a couple of drops of transmission fluid where it was parked, how the transmission operates or some strange noise, the most important thing is to check it from the moment the fault appears. If there is a problem, no matter how small, it is important to repair it immediately to avoid a higher cost to solve it later.

  1. Preventive service

Transmission fluids contain certain properties that protect the engine, which are lost with the passage of time and with the effort of the transmission. This causes the parts to suffer wear, so the protection of the transmission is diminishing. A transmission fluid change once a year can give you many more years of life and, at the end of the day, save you money.

  1. Transmission cooling system

One of the main reasons that a transmission in a trailer fails is because of the temperature. Due to the characteristics of the transmissions of these vehicles, the friction of its components can quickly increase the temperature of the entire system. When the temperature exceeds the ideal operating range, the seals harden, the clutch heats up, and the fluid itself loses properties. To avoid overheating of transmissions, it is necessary to keep your cooling system working in optimal conditions, especially when trailers are carrying very heavy loads.

  1. Good quality filters

Most automatic transmissions have an internal filter, which allows transmission fluid to flow, collecting all the impurities that it captures during its circulation through the transmission. These impurities can damage it by generating plugs in the flow, eroding the components and thus reducing the healthy life of the transmission. That is why a good quality filter will avoid these situations and allow services to be cheaper.

  1. Engine service

The transmission and engine are highly connected, so a poorly maintained engine will put unnecessary stress on the transmission system, causing faster wear of the transmission fluid properties, leaving the transmission unprotected.

  1. Smooth changes

In essence, most of the stress and wear on transmissions occurs during gear changes. Not generating additional effort to the clutch, both in automatic and standard transmissions, significantly reduces the effort of the transmission to make the change and at the same time maintains the engine revolutions without overloading it. Being careful with this helps considerably to extend the life of the transmission.

  1. That the service of your transmission is in a suitable place

One of the best recommendations to maintain the transmission of your trailer is that the maintenance service and any repairs are done in a place that has all the tools and experience to provide your vehicle with all the best in terms of components and fluid of transmission.

7 tips for truck tire maintenance

Tires are the only point of contact between the truck and the road and an essential element to guarantee safety and ensure mobility. In addition, good tire maintenance also means better vehicle performance and therefore fuel savings. That is why it is so important to maintain their quality and performance. Here are 7 tips for you to properly maintain tires on heavy vehicles such as trucks.

  1. Tire pressure

Proper tire inflation is the most important factor in prolonging the life of tires, as well as in achieving their best performance. Tires are optimised to have a certain amount of air in them to carry a certain load. Logically, a small variation of more or less 10% of the total air is allowed and, above or below this amount, the negative effects on the quality of the driving, the fuel economy and the speed bands will begin to be noticed. rolling. A tire that is low on air for the load it is carrying will develop uneven wear, heat up further, and fail prematurely. With an over-inflated tire, the tread will wear much faster in the center and will be more vulnerable if driving on poor road surfaces.

  1. Wear and depth

To check the tire wear, we must look at the depth of the tread and change them when they are worn. In this way, grip and traction are guaranteed, avoiding unpleasant surprises.

  1. The valves

The valves and their caps are usually made of rubber, which is why they end up deteriorating. Changing the valves when you change the tires is a good recommendation to protect the tires and the vehicle. At high loads, a rubber valve bends under force and eventually deteriorates. The valve plug is also important. It is the one that maintains the tightness and protects from dust and dirt. Regularly check the good condition of the valves and caps to extend the useful life of the tires.

  1. Clean and dry air

The quality of the air inside your tires can have a great effect on their life. The tires are developed and designed to operate in clean, dry air. Every air compressor must have filters and dryers to ensure that the air entering the tire is clean and dry. If the air entering the inside of the tire is contaminated with water, the moisture can tear the inner lining.

  1. Cleaning

Dirt, snow, ice, salt used to avoid icy areas on roads, or other debris left on tire treads can cause rubber to deteriorate prematurely. Tire cleaning should be done with warm soapy water, always avoiding the use of petroleum-based chemicals or other solvents, as these can damage the rubber.

  1. Driving habits

Driving technique has a major impact on tread wear. An experienced driver, following good driving and maintenance practices, could achieve up to double the kilometers on the same tires. Aggressive driving, speeding and harsh braking negatively affect performance and tire life.

  1. Balanced

Correct tire balancing is another critical element. Balancing helps prevent tire wear and eliminates vibrations. It also protects the suspension, steering and transmission of the vehicle. Whenever tires are changed or removed, they must be balanced.

Here at Great Western Trailers you will find everything you need to carry merchandise to a specific destination.